Decentralized ventilation unit Zehnder ComfoAir 70

The Zehnder ComfoAir 70 is a decentralized comfort ventilation unit with heat and moisture recovery and synchronous supply and extract air operation. It is used primarily in apartment renovations, but also in new residential construction projects. The comfort ventilation unit is particularly suitable for one- or two-room apartments, holiday apartments, or student apartments. The second room connections allow an additional room to be connected to the supply or extract air supply using the optional Zehnder air distribution system. An enthalpy exchanger is installed as standard in the unit, which ensures high heat and moisture recovery and thus provides a comfortable indoor climate, especially in winter. The Zehnder ComfoAir 70 can be installed with various external wall hoods or a reveal module for the virtually invisible integration of the outside and exhaust air ducts into the window reveal.

Advantages:

• compact dimensions (376 x 380 x 49mm (H x W x D), L 350 - 600mm)
• aesthetic design
• Capacity 50 m³/h
• Cross-counterflow enthalpy exchanger
• Efficiency: Heat recovery up to 82%, moisture recovery up to 78%
• Antifreeze system
• the device does not require a condensate drain
• Touch control panel on the device housing
• required wall duct and external wall supply/exhaust air opening
• Supply and exhaust air on the sides of the device
• for mounting on an exterior wall
• The combination of comfort ventilation unit and original Zehnder filter (according to ISO 16890) ensures dust-free room air and maximum hygiene

Technical data:

• Device dimensions:
  Inner wall hood (W x H x D): 440 x 660 x 145 mm
  External wall hood (W x H x D): 380 x 376 x 50 mm
• Weight: 24 kg
• External wall thickness at least 280 to 600 mm
• Wall mounting pipe: Ø 250 mm, length 600 mm
• Core hole: Ø approx. 270 mm
• Fans: DC radial fans
• Filter class: Supply/exhaust air ISO Coarse ≥ 70% (optional supply air ISO ePM10 ≥ 60%)
• Heat exchanger: Cross-counterflow enthalpy exchanger Housing: Aluminum powder-coated, RAL 9016, fine structure matt Device core: Expanded polypropylene (EPP)
• Electrical connection: 230 VAC / 50 - 60 Hz
• Max. current consumption: 0.75 A
• Power consumption: 4 W to 19 W (standby: < 1 W)
• Protection class: III (protective insulation)
• Protection class: IP30
• Volume flow: 15 - 25 - 40 - 65 m³/h
• Weight: 14 kg (device) / 3.8 kg (reveal)
• Operating range: -20°C to 40°C
• Frost protection control: from -4 to -15°C, then device switches to standby mode
• Control: 4 fan speeds, standby, filter and fault message, automatic flap closure in standby mode, optional sensor control via humidity, VOC and CO2 sensor
• Leakage (according to DIN 13141 Part 8 -2006):
  Internal: 0.1%
  External: 0.9%