Decentralized ventilation unit Awenta AHRP160 pro

The AHRP160 is a new generation of decentralized ventilation units that ventilate rooms while reducing heat loss. Using a ceramic accumulator heat exchanger, the AHR stores and retains thermal energy and then heats the cooler air blown in from outside. The difference between the AHR and HRV series lies in the solutions for automating their operation. The electronics used control the unit's operation and adjust its parameters depending on the conditions in the room where the AHR is installed.

The AHRP160 can connect multiple units installed in one or more rooms and link them wirelessly, eliminating the need for cumbersome power cable connections. Linking is possible in various modes, e.g., both units supply only air, or only extract air, or even alternate operation: one unit supplies supply air and the other extracts air.

Device components:

• Ceramic heat exchanger: The ceramic heat exchanger is the heart of the unit and one of its most important elements. The AHR features a hexagonal heat exchanger, achieving one of the highest heat recovery rates of any decentralized ventilation unit on the market.
  
  
• Duct: The duct is made of PVC with added silver ions to prevent bacterial growth inside. Additional insulation has also been used to reduce condensation and heat loss.
  
  
• The AHR is equipped with two air purification filters.
  
  
• Motor: AHR is equipped with an energy-saving brushless motor
  
  
• With the AHRE160 remote control, the device can be operated in the following modes:
  * RECUPERATION (70 s cycle / 70 s air flow)
  * EXHAUST (continuous operation in exhaust air direction)
  * AIR FLOW (continuous operation in air flow direction)
  * VENTILATE (fan operation at 3 speeds - for 30 minutes)
  * NIGHT (quiet)
  In addition, you can use the remote control to synchronize an unlimited number of AHR devices, set the time, and reset the filter clogging counter.
  
  
• Automatic blinds: Automatic flaps that interrupt the airflow when the unit is turned off and a soundproof interior panel increase user comfort.
  
  

• Temperature and humidity sensor: The wireless temperature and humidity sensor enables automatic operation of the device, adjusting the operating speed based on the measurements.

• Class G3 filters are designed to capture larger airborne particles such as dust, pollen, and other suspended matter. Class G stands for "coarse dust."

• The G3 filter typically captures particles in the range >10 micrometers. They have an average retention efficiency of approximately 80 to 90% for particles of this size, making them a very effective way to extend the lifespan of your equipment.