With a cooling capacity of 12.1 kW and a heating capacity of 13.5 kW (nominal values), the Fujitsu ABEG45KRTA operates as a ceiling-mounted unit that hangs visibly below the ceiling; indoor unit ABEG45KRTA, outdoor unit AOEG45KQTA. SEER 5.2 and SCOP 3.8, but the page does not state an energy efficiency class. According to the table, the indoor unit is 235 mm high; a wired remote control is included, and the page states that the drain hose can be routed to the right, left, side, or downwards beneath the unit. As a guide, the power class is suitable for rooms of approximately 93 to 121 m²^*.

Performance and range of application

The cooling capacity is 12.1 kW (adjustable range 4.0 to 12.6 kW), and the heating capacity is 13.5 kW (adjustable range 4.2 to 15.0 kW). According to the table, the unit operates in cooling mode at outdoor temperatures from minus 15 to plus 46 °C and in heating mode from minus 15 to plus 24 °C, three-phase at 400 V. The page does not state the power consumption or annual consumption; we can provide the energy label upon request.

The stated area of approximately 93 to 121 m²^* is a guideline based on standard ceiling height and normal insulation standards, not a binding design. Which power class is right for your property depends on the ceiling height, insulation standards, window areas, shading, as well as the number of people and devices. We can check the appropriate design for your property upon request.

* Guideline based on the cooling capacity specified by the manufacturer, at a standard ceiling height of approximately 2.5 m, normal insulation standards, and average solar radiation. Different conditions on site, such as large window areas, sloped roofs, or a high number of people, may require a different power class. The binding design is carried out on a property-specific basis. For a professional design of your property, please contact us.

The most important advantages at a glance

• 12.1 kW cooling and 13.5 kW heating capacity, adjustable range 4.0 to 12.6 kW and 4.2 to 15.0 kW according to the table.
• SEER 5.2 and SCOP 3.8 according to the table; the page does not state an energy efficiency class.
• Wired remote control included, weekly timer and external control input according to the page.
• Indoor unit 235 mm high, 235 x 1,700 x 705 mm, for mounting below the ceiling.
• Indoor unit from 34 dB(A) on the lowest setting according to the table.
• Fresh air supply via duct with optional module; MODBUS and KNX connection optional according to the page.

Functions in detail

Inverter and heat pump operation

The inverter adjusts the power to the demand: between 4.0 and 12.6 kW in cooling, between 4.2 and 15.0 kW in heating. In heating mode, the unit operates as an air-to-air heat pump and uses the outdoor air down to minus 15 °C according to the table. The automatic mode change switches between cooling and heating depending on the setpoint temperature and room temperature according to the page; the energy-saving mode limits the adjustable temperature range according to the page. Seasonal values according to the table: SEER 5.2, SCOP 3.8.

Airflow and filters

According to the page, the louvers swing up and down automatically, and the airflow adjusts automatically. The front panel can be opened without disassembly and removed for cleaning according to the page; an LED indicates when the filter needs cleaning according to the page. Outdoor air can be supplied via ducts and an optional module according to the page. The page does not provide information on filter efficiency.

Operating modes

• Cooling: 12.1 kW nominal, range 4.0 to 12.6 kW
• Heating: 13.5 kW nominal, range 4.2 to 15.0 kW, down to minus 15 °C according to the table
• Automatic mode change between cooling and heating according to the page
• Energy-saving mode with limited setpoint range and temperature reset according to the page
• Fresh air supply via duct with optional module according to the page
• Automatic shut-off and weekly timer according to the page

Control and comfort

• Wired remote control included; weekly timer according to the page
• External control input and automatic shut-off according to the page
• Connection to MODBUS and KNX interfaces optional according to the page, accessories available upon request

Operational safety

• Automatic restart after power failure according to the page
• Operating range according to the table: minus 15 to plus 46 °C cooling, minus 15 to plus 24 °C heating
• Drain hose and pipes can be routed to the right, left, side, or downwards beneath the unit according to the page; the page does not state a condensate pump
• Blue Fins: evaporator corrosion protection according to the page

Scope of delivery

Included in the standard scope:

• 1x Fujitsu ABEG45KRTA indoor unit
• 1x Fujitsu AOEG45KQTA outdoor unit
• 1x wired remote control

What you need additionally

• Refrigerant lines 9.52 mm + 15.88 mm; maximum line length according to the table 30 m
• Condensate line and mounting material for ceiling mounting
• Wall bracket or floor console for the outdoor unit (62 kg)
• Electrical supply line and circuit breaker
• Installation and commissioning by a certified company

Technical data

Indoor unit	Fujitsu ABEG45KRTA
Outdoor unit	Fujitsu AOEG45KQTA
Nominal cooling capacity (range)	12.1 kW (4.0 to 12.6 kW)
Nominal heating capacity (range)	13.5 kW (4.2 to 15.0 kW)
Energy efficiency class cooling / heating	not stated on the page
SEER / SCOP according to the table	5.2 / 3.8
Power consumption, annual consumption	not stated on the page
Power supply	three-phase, 400 V, 50 Hz
Sound pressure level indoor unit cooling (four settings)	45 / 41 / 39 / 34 dB(A)
Sound pressure level indoor unit heating (four settings)	45 / 41 / 39 / 34 dB(A)
Sound pressure level outdoor unit cooling / heating (high)	58 / 59 dB(A)
Dimensions indoor unit (H x W x D), weight	235 x 1,700 x 705 mm, 38 kg
Dimensions outdoor unit (H x W x D), weight	998 x 940 x 320 mm, 62 kg
Pipe connections liquid + gas	9.52 mm + 15.88 mm
Max. line length according to the table	30 m
Height difference	not stated on the page
Operating range outdoor temperature cooling / heating	minus 15 to plus 46 °C / minus 15 to plus 24 °C
Condensate pump	not stated on the page; drain hose freely routable according to the page
Blue Fins	evaporator corrosion protection according to the page
Manufacturer / EU representative according to the page	Fujitsu General Euro GmbH

Frequently asked questions

What cooling and heating capacity does the Fujitsu ABEG45KRTA with 12.1 kW have?

According to the table, 12.1 kW in cooling and 13.5 kW in heating, with adjustable ranges of 4.0 to 12.6 kW and 4.2 to 15.0 kW. SEER 5.2 and SCOP 3.8 according to the table, the page does not state an energy efficiency class. We can check which power class is right for your room upon request.

How big is the indoor unit and how is it mounted?

According to the table, the indoor unit measures 235 x 1,700 x 705 mm (height x width x depth) and weighs 38 kg; it hangs visibly below the ceiling and does not require a ceiling void. The drain hose and pipes can be routed to the right, left, side, or downwards beneath the unit according to the page; the outdoor unit AOEG45KQTA measures 998 x 940 x 320 mm and weighs 62 kg.

What exactly is included in the scope of delivery?

The delivery includes exclusively the indoor unit ABEG45KRTA, the outdoor unit AOEG45KQTA, and a wired remote control. Refrigerant lines, condensate line, bracket for the outdoor unit, and mounting material are not included; this page does not offer a mounting set. We can provide suitable material upon request.

Does the unit have a condensate pump?

The page does not state a condensate pump. The drain hose can be routed to the right, left, side, or downwards beneath the unit according to the page, so that the condensate can be drained with a slope; we can clarify upon request whether a pump is available as an accessory.

How long can the line between the indoor and outdoor unit be?

According to the table, the maximum line length is 30 m. The pipe connections are stated as 9.52 mm + 15.88 mm, the page does not state the maximum height difference. We can check upon request which line route is permissible for your property and whether the system needs to be supplemented by a certified company.

Can I use the unit for heating in winter?

Yes. The heating mode is stated according to the table down to minus 15 °C outdoor temperature; the heating capacity is 13.5 kW, at maximum 15.0 kW, the page does not state the energy efficiency class in heating. The available power decreases with falling outdoor temperatures, which is why the system is suitable as a supplement to the existing heating system.

How loud is the unit?

For the indoor unit, the table states 45 / 41 / 39 / 34 dB(A) in cooling and 45 / 41 / 39 / 34 dB(A) in heating, each on four settings. The outdoor unit is stated with 58 / 59 dB(A) in cooling and heating on the high setting.

Can I install the air conditioner myself?

The installation and commissioning of a split air conditioner is carried out by a certified company. Self-installation is not intended.