The Fujitsu ABEG54KRTA cools at 13.4 kW and heats at 15.5 kW nominal capacity; the ABEG54KRTA indoor unit is mounted as a ceiling-suspended unit below the ceiling, while the AOEG54KRTA outdoor unit operates outside. SEER 5.88 and SCOP 3.95, but the page does not state an energy efficiency class. According to the table, the indoor unit is 235 mm high; a wired remote control is included, and the page states that the drain hose can be routed to the right, left, side, or downwards beneath the unit. As a guide, the power class is suitable for rooms of approximately 103 to 134 m²^*.

Performance and range of application

The cooling capacity is 13.4 kW (adjustable range 4.5 to 14.5 kW), and the heating capacity is 15.5 kW (adjustable range 4.7 to 16.5 kW). According to the table, the unit operates in cooling mode at outdoor temperatures from minus 15 to plus 46 °C and in heating mode from minus 15 to plus 24 °C, three-phase at 400 V. The page does not state the power consumption or annual consumption; we can provide the energy label upon request.

The stated area of approximately 103 to 134 m²^* is a guideline based on standard room height and normal insulation standards, not a binding design. For shops, offices, and dining areas, additional internal loads from people, lighting, and equipment may increase the requirements compared to the guideline. We can check the appropriate design for your property upon request.

* Guideline based on the cooling capacity specified by the manufacturer, at a standard room height of approximately 2.5 m, normal insulation standards, and average solar radiation. Different conditions on site, such as large window areas, sloped roofs, or a high number of people, may require a different power class. The binding design is carried out on a property-specific basis. For a professional design of your property, please contact us.

The most important advantages at a glance

• 13.4 kW cooling and 15.5 kW heating capacity, adjustable range 4.5 to 14.5 kW and 4.7 to 16.5 kW respectively, according to the table.
• SEER 5.88 and SCOP 3.95 according to the table; the page does not state an energy efficiency class.
• Wired remote control included, weekly timer and external control input according to the page.
• Indoor unit 235 mm high, 235 x 1,700 x 705 mm, for mounting below the ceiling.
• Indoor unit from 38 dB(A) on the lowest setting according to the table.
• Fresh air supply via duct with optional module; MODBUS and KNX connection optional according to the page.

Detailed functions

Inverter and heat pump operation

The inverter control maintains the capacity between 4.5 and 14.5 kW in cooling and 4.7 and 16.5 kW in heating; as an air-to-air heat pump, the unit heats down to minus 15 °C outdoor temperature according to the table. The automatic mode change switches between cooling and heating depending on the setpoint temperature and room temperature according to the page; the energy-saving mode limits the adjustable temperature range according to the page. Seasonal values according to the table: SEER 5.88, SCOP 3.95.

Airflow and filters

According to the page, the louvers swing up and down automatically, and the airflow adjusts automatically. The front panel can be opened without disassembly and removed for cleaning according to the page; an LED indicates when the filter needs cleaning according to the page. According to the page, outdoor air can be supplied via ducts and an optional module. The page does not provide information on filter efficiency.

Operating modes

• Cooling: 13.4 kW nominal, range 4.5 to 14.5 kW
• Heating: 15.5 kW nominal, range 4.7 to 16.5 kW, down to minus 15 °C according to the table
• Automatic mode change between cooling and heating according to the page
• Energy-saving mode with limited setpoint range and temperature reset according to the page
• Fresh air supply via duct with optional module according to the page
• Automatic shut-off and weekly timer according to the page

Control and comfort

• Wired remote control included; weekly timer according to the page
• External control input and automatic shut-off according to the page
• Connection to MODBUS and KNX interfaces optional according to the page, accessories available upon request

Operational safety

• Automatic restart after power failure according to the page
• Operating range according to the table: minus 15 to plus 46 °C cooling, minus 15 to plus 24 °C heating
• According to the page, the drain hose and pipes can be routed to the right, left, side, or downwards beneath the unit; the page does not state a condensate pump
• Blue Fins: evaporator corrosion protection according to the page

Scope of delivery

Included in the standard scope:

• 1x Fujitsu ABEG54KRTA indoor unit
• 1x Fujitsu AOEG54KRTA outdoor unit
• 1x wired remote control

What you need additionally

• Refrigerant lines 9.52 mm + 15.88 mm; maximum line length according to the table 50 m
• Condensate line and mounting material for ceiling mounting
• Wall bracket or floor console for the outdoor unit (67 kg)
• Electrical supply line and circuit protection
• Installation and commissioning by a certified company

Technical data

Indoor unit	Fujitsu ABEG54KRTA
Outdoor unit	Fujitsu AOEG54KRTA
Nominal cooling capacity (range)	13.4 kW (4.5 to 14.5 kW)
Nominal heating capacity (range)	15.5 kW (4.7 to 16.5 kW)
Energy efficiency class cooling / heating	not stated on the page
SEER / SCOP according to the table	5.88 / 3.95
Power consumption, annual consumption	not stated on the page
Power supply	three-phase, 400 V, 50 Hz
Sound pressure level indoor unit cooling (four settings)	48 / 44 / 41 / 38 dB(A)
Sound pressure level indoor unit heating (four settings)	48 / 44 / 41 / 38 dB(A)
Sound pressure level outdoor unit cooling / heating (high)	57 / 59 dB(A)
Dimensions indoor unit (H x W x D), weight	235 x 1,700 x 705 mm, 38 kg
Dimensions outdoor unit (H x W x D), weight	998 x 940 x 320 mm, 67 kg
Pipe connections liquid + gas	9.52 mm + 15.88 mm
Max. line length according to the table	50 m
Height difference	not stated on the page
Operating range outdoor temperature cooling / heating	minus 15 to plus 46 °C / minus 15 to plus 24 °C
Condensate pump	not stated on the page; drain hose freely routable according to the page
Blue Fins	evaporator corrosion protection according to the page
Manufacturer / EU representative according to the page	Fujitsu General Euro GmbH

Frequently Asked Questions

What cooling and heating capacity does the Fujitsu ABEG54KRTA with 13.4 kW have?

According to the table, 13.4 kW in cooling and 15.5 kW in heating, with adjustable ranges of 4.5 to 14.5 kW and 4.7 to 16.5 kW. SEER 5.88 and SCOP 3.95 according to the table; the page does not state an energy efficiency class. We can check which power class is suitable for your room upon request.

How big is the indoor unit and how is it mounted?

According to the table, the indoor unit measures 235 x 1,700 x 705 mm (height x width x depth) and weighs 38 kg; it hangs visibly below the ceiling and does not require a ceiling void. The drain hose and pipes can be routed to the right, left, side, or downwards beneath the unit according to the page; the outdoor unit AOEG54KRTA measures 998 x 940 x 320 mm and weighs 67 kg.

What exactly is included in the scope of delivery?

The delivery exclusively includes the ABEG54KRTA indoor unit, the AOEG54KRTA outdoor unit, and a wired remote control. Lines, condensate line, bracket, and mounting material must be ordered separately; a mounting set is not selectable on this page. We can provide suitable material upon request.

Does the unit have a condensate pump?

The page does not state a condensate pump. According to the page, the drain hose can be routed to the right, left, side, or downwards beneath the unit, so that the condensate can be drained with a slope; we can clarify upon request whether a pump is available as an accessory.

How long can the line between the indoor and outdoor unit be?

According to the table, the maximum line length is 50 m. The pipe connections are stated as 9.52 mm + 15.88 mm, the page does not state the maximum height difference. We can check upon request which line route is permissible for your property and whether the system needs to be supplemented by a certified company.

Can I use the unit for heating in winter?

Yes. According to the table, the heating mode is specified down to minus 15 °C outdoor temperature; the heating capacity is 15.5 kW, at maximum 16.5 kW, the energy efficiency class in heating according to the page is not stated. At low outdoor temperatures, the available heating capacity decreases, so the system supplements the existing heating and does not replace it.

How loud is the unit?

For the indoor unit, the table states 48 / 44 / 41 / 38 dB(A) in cooling and 48 / 44 / 41 / 38 dB(A) in heating, each on four settings. The outdoor unit is stated at 57 / 59 dB(A) in cooling and heating on the high setting.

Can I install the air conditioner myself?

The installation and commissioning of a split air conditioner is carried out by a certified company. Self-installation is not intended.