The Wipcool P16 and P32 condensate pumps remove condensate from the indoor unit of an air conditioning system when there is no gradient for free drainage. You can choose the model from the variant selection: P16 with 16 l/h for systems up to 8 kW, P32 with 32 l/h for systems up to 12 kW. Both models pump to a height of up to 10 meters.

Design and Features

• Sensor without float: the water level is detected via a probe, not by a moving float part
• Brushless motor: without carbon brushes that wear out during operation
• LED display: indicates the operating status
• Wide voltage range: 100 to 240 V, 50 to 60 Hz
• Outlet: 6 mm inner diameter

Scope of Delivery

• 1x Wipcool condensate pump in the selected model, P16 or P32

What else you need

• Condensate hose with a 6 mm inner diameter in the required length
• Electrical connection at the installation site
• Installation and commissioning by a specialist company

Technical Data

Manufacturer	Wipcool
P16, max. pumping capacity	16 l/h
P16, suitable for systems up to	8 kW, 30,000 Btu/h
P16, noise level	19 dB
P32, max. pumping capacity	32 l/h
P32, suitable for systems up to	12 kW, 45,000 Btu/h
P32, noise level	21 dB
Max. pumping height	10 m, both models
Supply voltage	100 to 240 V, 50 to 60 Hz
Max. condensate temperature	50 °C
Outlet	6 mm inner diameter

Frequently Asked Questions

What is a condensate pump used for?

An indoor unit produces condensate during cooling operation. If the drain is higher than the unit or there is insufficient gradient, the condensate will not drain on its own. The pump then pumps it to the drain.

Which model is suitable for my system?

The P16 is designed for systems up to 8 kW, the P32 for systems up to 12 kW. You can find the cooling capacity of your unit in its technical data. You can choose the model from the variant selection.

How high does the pump pump?

Both models achieve a pumping height of up to 10 meters.

What does a sensor without a float mean?

The water level in the container is detected via a probe. There is no moving float that can become blocked.

Which hose do I need?

The outlet has an inner diameter of 6 mm. The appropriate hose is selected at the installation site according to the required length.

Is a hose included in the scope of delivery?

The pump in the selected model is delivered. The hose is not included in the scope of delivery.

Can I connect the pump myself?

The pump is electrically connected and integrated into the system's condensate line. Installation and commissioning are carried out by a specialist company.