The Mitsubishi MSZ-HR71VF delivers 7.1 kW cooling and 8.1 kW heating capacity, with a maximum of 7.4 kW in cooling and 9.0 kW in heating mode. With a SEER of 7.0, it is in energy efficiency class A++ in cooling mode, and with a SCOP of 4.3, it is in A+ in heating mode, on the scale from A+++ to D. The indoor unit has five fan speeds and operates at 33 dB(A) at the lowest setting. As a guideline, the capacity class is suitable for rooms of approximately 65 to 80 m²^*.

This model does not come with a Wi-Fi module from the factory. It is operated using the included infrared remote control, and a Wi-Fi module can be retrofitted as an accessory. If you want smartphone control from the outset, take a look at the AY, EF, and LN series, where the module is built in from the factory.

Performance and range of application

The unit delivers 7.1 kW cooling and 8.1 kW heating capacity. The cooling capacity is adjustable between 1.8 and 7.4 kW, and the heating capacity between 1.5 and 9.0 kW. The power consumption is 2.33 kW in cooling mode at plus 35 °C and 2.44 kW in heating mode at plus 7 °C. In cooling mode, the system operates between minus 10 and plus 46 °C outdoor temperature, and in heating mode between minus 10 and plus 24 °C.

Heating mode is designed for outdoor temperatures down to minus 10 °C. If your system should also heat at lower outdoor temperatures, we can check upon request which model would be suitable for this.

The stated area of approximately 65 to 80 m²^* is a guideline for standard room height and normal insulation standards, not a binding design. Which capacity class is right for your property depends on room height, insulation standards, window areas, shading, as well as the number of people and devices. A system that is too small will run continuously at full load, while one that is too large will cycle and consume electricity unnecessarily. We can check the appropriate design for your property upon request.

* Guideline based on the cooling capacity specified by the manufacturer, with a standard room height of approximately 2.5 m, normal insulation standards, and average solar radiation. Different conditions on site, such as large window areas, sloped roofs, or a high number of people, may require a different capacity class. The binding design is carried out on a property-specific basis. For a professional design of your property, please contact us.

The most important advantages at a glance

• 7.1 kW cooling and 8.1 kW heating capacity, with a maximum of 7.4 and 9.0 kW.
• Five fan speeds from 33 to 50 dB(A), the same in both operating modes.
• Energy efficiency class A++ in cooling and A+ in heating on the scale from A+++ to D, with a SEER of 7.0 and SCOP of 4.3.
• Pipe length up to 20 m and height difference up to 12 m between the indoor and outdoor units.
• Installation set in lengths of 3 to 12 m can be ordered directly, with 1/4" and 1/2" piping.
• Wi-Fi module can be retrofitted as an accessory; out of the box, the unit is operated via the infrared remote control.

Detailed functions

Inverter and heat pump operation

The inverter compressor adjusts its speed to the actual demand. At startup, the system runs at high power to quickly bring the room to the desired temperature. Then it ramps down to 1.8 kW in cooling mode and 1.5 kW in heating mode and maintains the temperature without constantly switching on and off. In heating mode, the unit operates as an air-to-air heat pump and uses the heat from the outdoor air down to minus 10 °C.

Five fan speeds

The indoor unit has five fan speeds. The manufacturer provides values for four of them, identical in both cooling and heating mode:

Fan speed	Cooling and heating
Low	33 dB(A)
Medium-low	38 dB(A)
Medium	44 dB(A)
High	50 dB(A)

The airflow speed can be selected in three stages via the remote control: low, medium, and high.

Operating modes

• Cooling: 7.1 kW nominal, adjustable from 1.8 to 7.4 kW
• Heating: 8.1 kW nominal, adjustable from 1.5 to 9.0 kW
• Dehumidification: reduces the humidity without cooling the room significantly
• Ventilation: air circulation without cooling or heating mode
• Powerful startup: quickly brings the room to the desired temperature after switching on

Airflow and operation

• Vertical swing: the air direction from ceiling to floor is controlled via the remote control
• Horizontal alignment of the louvers can be adjusted by hand
• Infrared remote control included
• Wi-Fi module optionally retrofittable as an accessory

Operating safety

• Fault diagnosis system in the indoor unit
• Automatic restart after power failure
• Storage of all entered values in the event of a power failure

Scope of delivery

Included in the standard scope:

• 1x Mitsubishi MSZ-HR71VF indoor unit
• 1x Mitsubishi MUZ-HR71VF outdoor unit
• 1x infrared remote control

Optional: Installation set 3 to 12 meters

You can order the appropriate installation set directly. It contains:

• Insulated Armacell 1/4" and 1/2" copper tubing, flared and with union nuts
• 16 mm condensate hose
• 5 x 1.5 mm² electrical and control cable
• Rodigas MS 257 wall bracket for the outdoor unit
• Wall sleeve

The refrigerant line of this set is designed for 1/2" and thus fits the pipe connections of this unit. Sets of smaller capacity classes usually feature 3/8" and do not fit.

What else you need

• Pipes and installation material, if you do not choose an installation set
• Condensate pump, depending on the installation situation
• Electrical supply line and circuit breaker
• Wi-Fi module, if you want smartphone control
• Installation and commissioning by a certified company

Technical data

Indoor unit	Mitsubishi MSZ-HR71VF
Outdoor unit	Mitsubishi MUZ-HR71VF
Cooling capacity	7.1 kW (min. to max.: 1.8 to 7.4 kW)
Heating capacity	8.1 kW (min. to max.: 1.5 to 9.0 kW)
Power consumption Cooling / Heating	2.33 / 2.44 kW
Energy efficiency class Cooling / Heating	A++ / A+, scale A+++ to D
SEER / SCOP	7.0 / 4.3
Sound pressure level indoor unit (4 specified stages)	33 / 38 / 44 / 50 dB(A)
Sound pressure level outdoor unit	53 to 57 dB(A)
Pipe connections Liquid + Gas	6.35 mm (1/4") + 12.7 mm (1/2")
Maximum pipe length	20 m
Maximum height difference	12 m
Operating range Cooling / Heating	-10 to +46 °C / -10 to +24 °C
Dimensions indoor unit (HxWxD)	305 x 923 x 262 mm, 12.5 kg
Dimensions outdoor unit (HxWxD)	714 x 800 x 285 mm, 40 kg
Wi-Fi	not built-in, Wi-Fi module can be retrofitted as an accessory

Frequently asked questions

What cooling and heating capacity does the MSZ-HR71VF have?

The cooling capacity is 7.1 kW, and the heating capacity is 8.1 kW. Both values are continuously adjustable via the inverter, from 1.8 to 7.4 kW in cooling mode and from 1.5 to 9.0 kW in heating mode. We can check which capacity class is right for your room upon request.

Does this model have Wi-Fi?

Not built-in. The MSZ-HR71VF is operated using the included infrared remote control. A Wi-Fi module can be retrofitted as an accessory. If you need smartphone control from the outset, the AY, EF, and LN series are the right choice, as the module is built in from the factory. We can let you know which accessories are suitable for this unit upon request.

Down to what outdoor temperature does the unit heat?

Heating mode is designed for outdoor temperatures down to minus 10 °C. With a nominal heating capacity of 8.1 kW and a maximum of 9.0 kW, the heating capacity is higher than the cooling capacity. The available power decreases as the outdoor temperature drops, which makes the system suitable as a supplement to an existing heating system. For lower outdoor temperatures, we can check upon request which model would be suitable for this.

Is the installation set included in the price?

The installation set is an optional addition and is added via the variant selection. Without a selected installation set, the delivery includes only the indoor unit, outdoor unit, and remote control. The set is available in lengths of 3 to 12 meters, with 1/4" and 1/2" piping.

How long can the pipe between the indoor and outdoor units be?

The maximum pipe length is 20 m, and the maximum height difference between the indoor and outdoor units is 12 m. The pipe connections are 6.35 mm (1/4") on the liquid side and 12.7 mm (1/2") on the gas side. We can check which length is suitable for your installation situation upon request.

How large is the indoor unit?

The indoor unit measures 923 mm in width, 305 mm in height, and 262 mm in depth, and weighs 12.5 kg. Check before ordering whether the wall area at the intended installation location is sufficient for it. The outdoor unit measures 800 x 714 x 285 mm and weighs 40 kg.

How loud is the unit?

The indoor unit operates between 33 and 50 dB(A) in both cooling and heating mode. The manufacturer specifies 53 to 57 dB(A) for the outdoor unit.

Can I install the air conditioner myself?

The installation and commissioning of a split air conditioner are carried out by a certified company. Self-installation is not intended.