Mitsubishi Electric
Mitsubishi MSZ-LN60VG2 W Split Air Conditioner 6.1 kW with Wi-Fi
Mitsubishi MSZ-LN60VG2 W Split Air Conditioner 6.1 kW with Wi-Fi
Mitsubishi MSZ-LN60VG2 W Diamond split air conditioner in Natural White, 6.1 kW cooling and 6.8 kW heating, for rooms of approximately 55 to 70 m²*. A++ in cooling and heating, on the A+++ to D scale. Piping up to 30 m, with 3D i-see sensor.
incl. VAT + Shipping Costs
Crowd
Couldn't load pickup availability
- Brand-name units from a specialist retailerOriginal products from leading manufacturers
- Personal adviceBy phone, email or WhatsApp
- Installation on requestBy specialist installers in your region
- Secure paymentPayPal with Buyer Protection, credit card and more
Description
Description
The Mitsubishi MSZ-LN60VG2 delivers 6.1 kW of cooling and 6.8 kW of heating capacity, and the line between the indoor and outdoor units can be up to 30 m long. With a SEER of 7.5 and SCOP of 4.6, the unit is in energy efficiency class A++ for both cooling and heating on the scale from A+++ to D. The indoor unit operates at 29 dB(A) on the lowest fan setting. The 3D i-see sensor detects the temperature distribution in the room and adjusts the airflow accordingly. The Wi-Fi module is built-in from the factory, and the unit is controlled via the MELCloud app. As a guideline, the power class is suitable for rooms of approximately 55 to 70 m²*.
Capacity and range of application
The unit delivers 6.1 kW of cooling and 6.8 kW of heating capacity, which corresponds to around 24,000 BTU. The cooling capacity is adjustable between 1.4 and 6.9 kW, and the heating capacity between 1.8 and 9.3 kW. The power consumption is 1.79 kW in cooling mode and 1.81 kW in heating mode. In cooling mode, the system operates at outdoor temperatures between minus 10 and plus 46 °C, and in heating mode between minus 15 and plus 24 °C.
The heating capacity ranges from 1.8 to 9.3 kW, i.e., from a quarter of the rated capacity to one and a half times it. This allows the system to significantly increase its output on cold days and continue to run in the lower partial load range on mild days without constantly switching on and off.
The stated area of approximately 55 to 70 m²* is a guideline for standard room height and normal insulation standards, not a binding design. Which power class is right for your property depends on room height, insulation standards, window areas, shading, as well as the number of people and devices. An undersized unit will run continuously at full load, while an oversized unit will cycle and consume electricity unnecessarily. We can check the appropriate design for your property upon request.
* Guideline based on the cooling capacity specified by the manufacturer, with a standard room height of approximately 2.5 m, normal insulation standards, and average solar radiation. Different conditions on site, such as large window areas, sloped roofs, or a high number of people, may require a different power class. The binding design is carried out on a property-specific basis. For a professional design of your property, please contact us.
The most important advantages at a glance
- Energy efficiency class A++ in cooling and heating on the scale from A+++ to D, with a SEER of 7.5 and SCOP of 4.6.
- 29 dB(A) on the lowest fan setting of the indoor unit, 45 dB(A) on the highest.
- 3D i-see sensor: detects the temperature distribution in the room and controls the airflow accordingly.
- Total line length up to 30 m and height difference up to 15 m, the highest values in our range.
- Power consumption of 1.79 kW in cooling mode and 1.81 kW in heating mode.
- Wi-Fi built-in from the factory: the Wi-Fi module is already built into the indoor unit, and the unit is controlled via the MELCloud app.
Detailed functions
3D i-see sensor
The sensor scans the room and detects where it is warmer and where it is cooler. The system adjusts the airflow accordingly, rather than blowing evenly in a fixed direction. In rooms with uneven temperature distribution, such as those with a window front on one side or a sloped roof, this has an effect on comfort. No other model in our range has this sensor.
Inverter and heat pump operation
The inverter compressor adjusts its speed to the actual demand. At startup, the system runs at high power to quickly bring the room to the desired temperature. After that, it ramps down to 1.8 kW in heating mode and maintains the temperature without noticeable fluctuations. In heating mode, the unit operates as an air-to-air heat pump and uses the heat from the outdoor air down to minus 15 °C. The winter regulator keeps the outdoor unit operational even at low temperatures. The SCOP of 4.6 means that over the heating season, for every kilowatt-hour of electricity used, an average of 4.6 kilowatt-hours of heat is delivered.
Operating modes
- Cooling: 6.1 kW nominal, adjustable from 1.4 to 6.9 kW
- Heating: 6.8 kW nominal, adjustable from 1.8 to 9.3 kW
- Econo Cool: reduced cooling capacity while maintaining the same level of comfort through adjusted airflow
- Silent mode: reduced noise generation and reduced power
- Dehumidification: reduces humidity without cooling the room significantly
- Fan: air circulation without cooling or heating operation
Control and comfort
The Wi-Fi module, sometimes also referred to as a Wi-Fi module, is built into the indoor unit and does not need to be retrofitted. The unit is controlled via the MELCloud app. An infrared remote control is also included, and a wired remote control can also be connected.
- i-save: stores a reduced setpoint temperature and recalls it at the touch of a button
- Weekly operating program and timer: fixed operating times throughout the week
- Automatic fan control depending on the deviation from the setpoint temperature
- Air purification filter and silver ion air purification filter in the indoor unit
- Unit width 890 mm with a depth of 233 mm and height of 307 mm, 16.0 kg
Operational safety
- Anti-freeze protection: the indoor unit only blows in heating mode once the heat exchanger is warm
- Automatic restart after power failure
- Winter regulator for operating the outdoor unit at low temperatures
Note on the outdoor unit
The outdoor unit of this model measures 840 x 330 x 880 mm and weighs 55 kg. It is therefore significantly larger and heavier than the smaller models in the series, which are 550 to 714 mm high and weigh 35 to 40 kg. A standard wall mount is usually not sufficient for this. Before ordering, check whether the intended installation location, mount, and surface are designed for this weight. We can check the installation situation upon request.
Scope of delivery
- 1x Mitsubishi MSZ-LN60VG2 W indoor unit in Natural White, with built-in Wi-Fi module
- 1x Mitsubishi MUZ-LN60VG outdoor unit
- 1x infrared remote control
What you need in addition
For this model, no installation set is offered via the variant selection. You order the lines and installation material separately or have them supplied by your specialist company. The pipe connections are 6 mm on the liquid side and 12 mm on the gas side. The gas line is therefore larger than on the smaller models in the series, which use 10 mm, and an installation set for a smaller power class will not fit. The total line length must not exceed 30 m and the height difference 15 m.
- Insulated copper line 6 mm and 12 mm, up to a maximum of 30 m
- Condensate hose and wall penetration
- Wall mount or floor console for the outdoor unit, designed for 55 kg
- Electrical supply line and protection
- Wired remote control, if desired
- Installation and commissioning by a specialist company
We can put together the material your installation situation requires upon request.
Technical data
| Indoor unit | Mitsubishi MSZ-LN60VG2 W, Natural White |
| Outdoor unit | Mitsubishi MUZ-LN60VG |
| Cooling capacity | 6.1 kW (min. to max.: 1.4 to 6.9 kW), around 24,000 BTU |
| Heating capacity | 6.8 kW (min. to max.: 1.8 to 9.3 kW) |
| Power consumption Cooling / Heating | 1.79 / 1.81 kW |
| Energy efficiency class Cooling / Heating | A++ / A++, scale A+++ to D |
| SEER / SCOP | 7.5 / 4.6 |
| Sound pressure level indoor unit (low / high) | 29 / 45 dB(A) |
| Sound pressure level outdoor unit Cooling / Heating | 55 / 55 dB(A) |
| Pipe connections Liquid + Gas | 6 mm + 12 mm |
| Total line length | 30 m |
| Maximum height difference | 15 m |
| Operating range Cooling / Heating | -10 to +46 °C / -15 to +24 °C |
| Dimensions indoor unit (WxDxH) | 890 x 233 x 307 mm, 16.0 kg |
| Dimensions outdoor unit (WxDxH) | 840 x 330 x 880 mm, 55 kg |
| Power supply | 220 to 240 V |
| Wi-Fi / WiFi module | built into the indoor unit, control via MELCloud |
Frequently asked questions
What cooling and heating capacity does the MSZ-LN60VG2 have?
The cooling capacity is 6.1 kW, the heating capacity 6.8 kW, which corresponds to around 24,000 BTU. Both values are continuously adjustable via the inverter, from 1.4 to 6.9 kW in cooling mode and from 1.8 to 9.3 kW in heating mode. We can check which power class is right for your room upon request.
What do SEER 7.5 and SCOP 4.6 mean?
Both values describe the efficiency over an entire season, not just at the test point. SCOP 4.6 means that, calculated, an average of 4.6 kilowatt-hours of heat is delivered for every kilowatt-hour of electricity used. SEER 7.5 is the corresponding value for cooling mode. This results in energy efficiency class A++ in both operating modes, on the scale from A+++ to D.
What does the 3D i-see sensor do?
The sensor detects the temperature distribution in the room and adjusts the airflow accordingly, rather than blowing evenly in a fixed direction. In rooms with uneven temperature distribution, such as those with a window front on one side or a sloped roof, this has an effect on comfort.
What color is this unit?
This unit is the Natural White version, identifiable by the letter W at the end of the model designation MSZ-LN60VG2 W. The series is also available in Pearl White, Onyx Black, and Ruby Red. Technically, all versions are identical, the outdoor unit MUZ-LN60VG is the same in all cases and is designed in white.
Is an installation set included in the price?
No. The delivery includes exclusively the indoor unit, outdoor unit, and remote control. You order the lines and installation material separately. The pipe connections are 6 mm and 12 mm and differ from the smaller models in the series. We can put together the appropriate material for you upon request.
How long can the line between the indoor and outdoor unit be?
The total line length is a maximum of 30 m, the maximum height difference between the indoor and outdoor unit 15 m. This is the longest line length in our range. We can check which length is suitable for your installation situation upon request.
Does the air conditioner have Wi-Fi, and do I need additional accessories?
No, additional accessories are not necessary. The Wi-Fi module, sometimes also referred to as a Wi-Fi module, is already built into the indoor unit. The unit is controlled via the MELCloud app. You only need a Wi-Fi network at the installation location. A wired remote control can also be connected.
Can I use the unit to heat in winter?
Heating mode is possible down to minus 15 °C outdoor temperature. With 6.8 kW nominal and up to 9.3 kW at maximum, the heating capacity is above the cooling capacity. The available power decreases as the outdoor temperature falls, which is why the system is suitable as a supplement to the existing heating system.
How loud is the unit?
The indoor unit operates between 29 and 45 dB(A) depending on the fan setting. For the outdoor unit, the manufacturer specifies 55 dB(A) in both cooling and heating.
Can I install the air conditioner myself?
The installation and commissioning of a split air conditioner is carried out by a certified specialist company. Self-installation is not intended.
Manufacturer Information
Manufacturer Information
Manufacturer/EU representative: Mitsubishi Electric Europe B.V.
Postal address: Harman House, 1 George Street, Uxbridge, Middlesex, UB8 1QQ, United Kingdom
Email address: info@mecc.mee.com
Important Note
Important Note
Dear Customer, please note that by purchasing this product, the buyer/user confirms compliance with Regulation (EU) No 517/2014 of the European Parliament and of the Council of 16 April 2014 on fluorinated greenhouse gases and Regulation (EU) No 573/2024 of the European Parliament and of the Council of March 2024 on fluorinated greenhouse gases, which stipulates the following: The person who buys/uses the split air conditioner confirms that it will be professionally installed by certified professionals.
F-Gas Regulation Download Declaration

Contact Us
Hinweis zu Kundenbewertungen: Bewertungen mit dem Kennzeichen „Verifiziert“ stammen von Kunden, die das Produkt bei uns gekauft haben. Die Prüfung erfolgt automatisch durch unseren Bewertungsdienst Judge.me anhand der Bestelldaten. Bewertungen ohne dieses Kennzeichen wurden über das Formular auf dieser Seite abgegeben. Bei diesen Bewertungen wird nicht geprüft, ob das Produkt tatsächlich gekauft wurde.